ARTHUR HOLM Dynamic 3 AH22D3R16GA, Руководство пользователя

Страница: 13 / 26

13
CONTROLS
OSD monitor control
In order to access to the OSD monitor control menu, use the IR remote
control supplied with the monitor:
POWER Switch ON/OFF the monitor
MENU Activates the OSD menu on screen
UP Cursor control up on the OSD menu
DOWN Cursor control down on the OSD menu
LEFT Cursor control left on the OSD menu
RIGHT Cursor control right on the OSD menu
OK Selects the function on the OSD menu. When the OSD
menu is not active on screen, selects the input source
Below the monitor, there is a screen to set-up the monitor. Press the UP
or DOWN buttons to change the function. Press the OK button to select
the function. Change the parameter using the UP or DOWN buttons
and press OK again to save the changes.
AHNET ID Selects the number AHnet ID to RS422 to externally
control the monitor
INPUT SELECT Selects the input source signal (DVIA, DVI1 or DVI2)
BRIGHTNESS Configuration of the monitor brightness level
CONTRAST Configuration of the monitor contrast level
BACKLIGHT Configuration of the monitor backlight level
STATUS INFORMATION List of the monitor status to service