Veneer Guide (Optional)
The DB2 and DB1Twin monitors are available in a special version that is
prepared to be mounted from below the table with a Veneer finishing on the
top of the monitor to match the table. The Veneer is not supplied.
The Veneer option (V1, V2, V3) are available under request.
The Veneer can be placed in three ways:
VENEER
INTRODUCTION
9
Veneer: The veneer thickness must be
5mm [0.19]. A mechanized blind hole
will be necessary to hide the touch
button copper cylinder.
Distance Plate: For Veneers
Thickness of 1mm [0,04] or less. It will be
necessary a Distance Plate to hide the
touch button copper cylinder.
Veneer
Distance Plate
Option2: DB2 V2
Option3: DB2 V3
Option1: DB2 V1
Veneer
Veneer
