ARTHUR HOLM AH17D3HDGATalk, Руководство пользователя

Страница: 36 / 48

36
DYNAMICTALK AHnet PROTOCOL
Communications protocol
COMMUNICATION RS422
CONNECTION
RJ45
WIRING CAT-5
Wiring Diagram
1. Data TX +
2. Data TX –
3. Data RX +
4. NC
5. NC
6 .Data RX
7. NC
8. NC
Connection
PINS 1 & 2 The units respond
PINS 3 & 6 The units receive instructions
Protocol to control the unit by addressable RS422 bus.
You can connect up to 30 devices on the same RS422 bus.
You can use an AH Interface Ethernet, to control the RS422 bus.
The units should have a set address and the address must start by 1.
Maximum cable length between ends, 500 m/1640 ft.
AHnet protocol
Using 5 bytes communication:
BYTE 0 START BYTE
BYTE 1 ADDRESS BYTE
BYTE 2 COMMAND BYTE
BYTE 3 VALUE 1
BYTE 4 VALUE 2
RJ-45
Speed and configuration
BAUD RATE
38400
DATA BITS 8
PARITY NONE
STOP BITS 1