6
Doc.-no.: DPC200-R_02_EN
Issue: 06/2018
INSTALLATION
3.
Installation
The differential airflow / pressure controller DPC200-R is designed for wall mounting.
•
The mounting surface must be solid enough and vibration-free.
• The environment has to fulfill the ambient climatic conditions as given in the technical
data.
Material damage
Read the manual carefully before installation and operation
Only experienced stuff may connect the device and bring it into
operation.
CAUTION
3.1 Dimensions
All dimensions in mm.
•
The device is position depended.
•
The DPC200-R must be mounted vertically
•
The DPC200-R can be attached to a wall.
NOTICE
3.2 Wall mounting
1. Hold the DPC200-R against the wall. Mark the mounting holes.
2. Drill mounting holes for properly sized screws.
3. Put the screws through the housing mounting holes.
4. Tighten screws.
ø6
ø5
M16 X 1.5
4.5
- +
104
54
95
70
