10
Doc.-no.: DPC200-R_02_EN
Issue: 06/2018
OPERATION
5.3 Measuring mode
Display
Action
ΔP Measurement
200 Pa
Start menu:
Press button T1 approx. two seconds
menu
Press button T2 to get to the next menu item
unit metric
Press button T1 to switch between:
[Pa] and [m
3
/h] <=> [InH
2
O] and [l/s]
Press button T2 to get to the next menu item
operating mode
control mode
Press button T1 to switch between:
measuring mode <=> control mode
Press button T2 to get to the next menu item
parameter
diff. pressure
Press button T1 to switch between:
diff. pressure <=> volume flow
Press button T2 to get to the next menu item
If selected parameter = diff. pressure
limit switch
150 Pa
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
alarm delay time
Switching delay time adjustment range:
1...60 seconds or 2....15 minutes
back and confirm
Press button T1 to leave the menu
Press button T2 to stay in the menu
If selected parameter = volume flow
than follows the additional input for the k-factor
fan k-factor
k = 70
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
limit switch
300 m³/h
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
alarm delay time
Switching delay time adjustment range:
1...60 seconds or 2....15 minutes
back and confirm
Press button T1 to leave the menu
Press button T2 to stay in the menu
5.4 Control mode
Display
Action
ΔP Measurement
200 Pa
Start menu:
Press button T1 approx. two seconds
menu
Press button T2 to get to the next menu item
