Arthrex DrillSaw Mini 300 System Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 48

Arthrex DrillSaw Mini 300 System Скачать руководство пользователя страница 12

DrillSaw Mini 300™ System

User’s Guide

DFU-0223-2 Rev. 0

Page 6

2

2

.

.

0

0

Product Description and Intended Use

2.1

Product Description

The Arthrex DrillSaw Mini 300 System is a battery powered surgical

instrument. The

handpiece contains a microprocessor and is powered by a Lithium Ion battery.

Activation of the handpiece is achieved by pressing a hand switch.

The handpiece utilizes a drop-in style battery that does not go through the

sterilization process, which provides longer life from the battery pack. The battery
pack is used in conjunction with a sterile battery case that holds the battery and
prevents contact with the sterile surgical field.

2.2

Intended Use

The DrillSaw Mini 300™ System is a modular electric system, consisting of a
handpiece drive, various accessories, and a charging station for machining bones.
It can be used for small bone orthopedic and sports medicine applications to make

osteotomies, drill holes, and drive pins and wires.

2.3

Contraindications

The DrillSaw Mini 300 System is contraindicated in any non-orthopedic surgery

procedure and procedure disregarding the intended use.
Specifically:

•

use by unskilled/untrained personnel

•

disregarding the intended use

•

non-compliance with the operation mode

•

usage of improper accessories

Only use Arthrex accessories.

W A R N I N G !

Misuse may damage the DrillSaw Mini 300 System and cause risks and hazards for

patients, users and third parties.

W A R N I N G !

This device is only for use under the supervision of a trained and licensed physician.

This device should not be used by untrained personnel or used for indications other

than those described in this User’s Guide.

«
...
10
11
12
13
14
...
»

Содержание DrillSaw Mini 300 System

















































Отзывы:

Нет отзывов