Artforma S2, Руководство пользователя

Страница: 6 / 11

When the Weather Station receives the necessary data - information about the temperature
in the place where the external sensor is installed, it will start searching for a time signal
(transmitted by a DCF transmitter from Germany).
If you press button, when the station is switched on, an information about the mode
and intensity of DCF transmitter will appear on the screen. This intensity is distinguished
trough indica-tion on the screen: from one bar (which means the weakest signal) up to three
(he strongest sig-nal).
When the clock receives a radio-controlled time signal, the buttons are not active, and the
bright-ness of the display screen is reduced. Once the signal is received, the brightness of the
display screen will be back to normal.
Upon reception of DCF time code, the weather station will automatically update an accurate
time. The clock will try to receive the DCF signal automatically every night at: 1:00 AM, 2:00
AM, 3:00 AM If it fails till 3.00 AM, the device will try to receive the signal once again at 4:00
AM and 5:00 AM. In case of failure, the device will stop attempts of reception till 1:00 AM on
the next day.
In order to launch the DCF signal reception manually, press the button.
In order to stop reception of the DCF signal, press the button once again.
6
s2 weather station configuration
Reception of the DCF time signal
/ WAVE
/ WAVE
/ WAVE
WARNING