Artforma S2, Руководство пользователя

Страница: 5 / 11

Installation of back-up batteries in the device
If there is a power failure, the illumination will turn off. in such case, the back-up battery will
main-tain the time and all settings of the device.
Open the battery compartment by sliding the cover on the rear side of the device. Then
put a CR2032 lithium battery (not included) so that the part of the battery marked with
+ was directed upwards. Then close the battery compartment completely by pressing
the cover.
Warning!
The external transmitter handles transmission in an open space for a distance up to 30
meters. However, the actual transmission range may vary depending on the signal's route. It
means that each obstacle (roof, walls, floors, ceilings, high trees etc.) reduces the transmis-
sion range by half.
5
s2 weather station configuration
Battery compartment cover
Put one CR2032 battery
to the battery case