ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-1 (453-5002), C406-1HM (453-5003)
Page 61 of 67
Feb 28/2019
25-62-10
TASK 25-62-10-990-802
2.
Registration
SUBTASK 25-62-10-990-001
A.
Responsibility
1)
It is the responsibility of the aircraft owner to register the ELT.
a)
If an ELT is moved to a different aircraft (i.e., an aircraft other than the one it was originally installed
on), and/or the aircraft is registered in a new country, the ELT must be re-registered.
b)
If the aircraft is registered in a new country, the ELT must be re-registered.
c)
The product label must re-marked with the new HEX ID code to indicate new programming, if
applicable.
SUBTASK 25-62-10-990-002
B.
Required Information
1)
The following information is required when registering an ELT:
a)
The unique Hex ID code printed on the ELT product label,
b)
The information listed in SUBTASK 25-62-10-990-002 on page 62.
2)
The information (i.e., address, telephone number, etc.), filed as part of the registration process, should be
kept up to date.
SUBTASK 25-62-10-990-003
C.
Where to Register
1)
In the United States, the National Oceanic and Atmospheric Administration (NOAA) is the registration
agency.
2)
Specific registration web sites and information may be found at:
a)
The Artex products web site at
, which has links to on-line registration sites and also
a link to registration forms and instructions for a number of countries.
b)
An ELT may also be registered in the United States by going directly to the NOAA ELT registration web
site at
www.beaconregistration.noaa.gov
NOTE: NOAA may also be contacted by mail at:
SARSAT Beacon Registration
NSOF, E/SPO53
1315 East West Hwy
Silver Spring, MD 20910-3282
Phone 1-888-212-7283 or 301-817-4565
3)
In other countries, the national civil aviation authority in the applicable country should be contacted to
obtain registration information.
