Artesyn Embedded Technology 6806800V01A Скачать руководство пользователя страница 35

Страница: 35 / 108

Hardware Preparation and Installation

SharpStreamer™ Pro PCIE-7210/7211 Installation and Use (6806800V01A)

4. Insert the PCIE-7210/7211 card into the PCIe slot, secure it, and ensure that the card is

properly fitted in the PCIe slot.

5. Lock the slot ejectors, close the system cover and then power on the system.

2.4.2

PCIE-7210/7211 Card Removal

To remove the PCIE-7210/7211 card, perform the following steps:

1. Make sure you are in an ESD-safe environment.

2. Power off the system, disconnect the system from the electrical outlet and peripherals and

remove any cables connected to the card.

3. Remove the system cover.

Make sure that the card has enough air flow after closing the system with the cover.
Refer to

MaxCore MC3000 Platform Installation and Use

manual for setting the fan speed

accordingly.

The CPU transcoding performance is directly related to the airflow and cooling ability of
the server in which the card is installed.

Wait at least 30 minutes for the card to cool down as the heat sink could be extremely
hot.

Содержание 6806800V01A













































































































Результаты поиска

Содержание 6806800V01A

Отзывы:

Похожие инструкции для 6806800V01A

Бренды по названию

Популярные бренды

Artesyn Embedded Technology 6806800V01A, Сборка, установка и использование

Результаты поиска

Содержание 6806800V01A

Отзывы:

Похожие инструкции для 6806800V01A

Бренды по названию

Популярные бренды