Artel NCA115-2A Скачать руководство пользователя страница 37

37 of 36

EN

GENERAL GUARANTEE

All products are subject to accurate testing and are covered by 
warranty for 24 months from the date of purchase, documented 
by invoice or purchase receipt that will be presented to authorized 
technicians. If the document does not show up, it will be invalidate 
the right of the owner of the appliance. Warranty means the 
replacement or repair of parts of the appliance that are defective at 
source due to manufacturing faults.
 
1. Warranty covering manufacturing defects and defects in 
material declines:
- for unauthorized personnel work;
- for damage caused by transport or for causes not attributable to 
the manufacturer;
- for incorrect installation;
- for incorrect electrical connection;
- for periodic maintenance not performed;
- for outdoor accidents (lightning, floods, etc ...);
- for incorrect use and maintenance.
 
2. Complete replacement of the machine can only take place 
following the unquestionable decision by the manufacturer in 
special cases

3. The Company declares no responsibility for any damage that 
may, directly or indirectly, result in persons, things or animals as a 
result of non-observance of the instructions in the Instructions book 
and in particular concerning the installation, use and maintenance 
of the appliance.

GUARANTEE LIMITATIONS

Limited Warranty covers manufacturing defects, provided that 
the product has not been damaged by improper use, improper 
handling, incorrect connection, tampering, and installation errors. 
The following components are covered by a twelve months war-
ranty:
- combustion burners;
- resistance.
 
They are not covered by warranty:
- the glass of the door;
- general gasket and fiber door;
- painting;
- tiles;
- the remote control
- Internal sides
- Any damage caused by inadequate installation and / or shorta-
ges of the consumer.
 
The images are purely indicative and may not match the reality 
of the product. Pictures are only examplary and they are needed 
to understand how the product works.

Содержание NCA115-2A








































Отзывы: