Artel DigiLink DLC910, Инструкция по установке и эксплуатации

Страница: 15 / 28

DLC910 Function Module Installation and Operations Manual 5
Overview of the DLC910 Module
Table 1. DLC910 Elements
Item Module Element for details, see...
5 Front panel alarm indicator OK LED. Understanding the Front Panel Status
LEDs (page 10)
6 Front panel status indicator LEDs for Quadrants 1, 2, 3, and 4.
7 Front panel reset switch (RESET) to reset the DLC910
module.
Using the DLC910 Reset Switch (page
14)
8 Monitor select switch (SELECT) to select the output to the
monitor jack: Full 1, Full 2, Full 3, or Full 4.
Using the Monitor Jack (page 11)
9
Front panel monitor 75 Ohm
HD-BNC
output jack (MON).
10 Backplane connector that provides power to the module,
allows the module to share signals with other function
modules, and is used for alarm and management signals.
Configuring the Module with DigiLink
Manager (page 7)
(Continued)