5. Color
Touch "C" key to enable Color Menu, the key clicks and the indicator lights up.
Then rotate the touch toggle to adjust the RGB value until you get the desired
color.
Up to 4 colors can be recorded in manual mode. Each figure key corresponds to
one color. The procedure to record a color is described below:
Touch "C" key to enable Manual Mode, the key clicks and the indicator is lit.
Repeat step a~d to save more colors to the other 3 figure keys.
All indicators flash momentarily once to indicate the current parameters,
including the value of color and brightness, have been saved into the key.
Touch any of the figure keys to which you wish to record the color, and hold
on for more than 2 seconds.
c.
a.
Rotate the touch toggle to adjust RGB value until you get desired color.
b.
d.
e.
Touch "C" key to enable Manual Mode. Then touch the corresponding button of
1~4 to raise the color which you've stored in the key. The LED indicator lights
up and it starts to display the recorded color.
5.1 Recording Color
5.2 Playback Color
5.3 Setting Fadetime for Color Exchange
Touch "C" key and hold on for 5 seconds till all LED indicators flash once.
Then release the key and the "C" key flashes repeatedly.
Different keys represent different fadetime. The table2 details the fadetime
information.
The existing mode ends and changes to normal mode automatically.
All indicators flash momentarily once to confirm the setting.
Touch any one of these keys--1, 2, 3, 4, P, C, B or S.
To set the fadetime for color exchange, you take the following procedures:
Keys
Fadetime
1
2
3
4
1s
2s
3s
4s
P/C/B/S
0s (no fade time)
Operation Guide
Table 2
Operation Guide
Each figure key can have a color, or a scene, or both elements recorded.
6.1 Recording SCENE
Up to 4 scenes can be recorded and played back in this mode. Each figure key
corresponds to one scene. The procedure to record a scene is described below:
Touch "P" or "S" key to enable Auto Mode, the key clicks and the LED
indicator lights up.
Repeat step a~d to save more scenes to the other 3 figure keys.
All indicators flash momentarily once to indicate the current parameters
(including the built-in program and the value of speed and brightness) have
been recorded and saved into the key.
Touch any of the figure keys to which you wish to record the scene, and hold
on for more than 2 seconds.
a.
b.
c.
d.
Rotate the touch toggle to select the built-in program or adjust the speed.
e.
Touch "P" or "S" key to enable Auto Mode. Then touch the corresponding button
of 1~4 to raise the scene which has been stored in it. The LED indicator lights
up and it starts to display the recorded scene.
6.2 Playback SCENE
* NOTE:
6.3 SCENE Record Lock/Unlock
To unlock scene record, touch "P" key and "S" key and hold on for about 10
seconds until all keys flash once.
To lock scene record, touch "S" key and "P" key simultaneously and hold on for
about 10 seconds. At this time, the "S" key is not valid. Besides, the figure
keys1~4 can play back saved scenes only, but can not record scenes.
6. SCENE
Page 6
DLC-4 User Instruction
Page 7
DLC-4 User Instruction
