ARTE COSY AR65, Руководство по установке и инструкция пользователя

Страница: 16 / 23

ARTE © fireplace |COSY LINE
I
NSTALLATION MANUAL
&
USER GUIDE
16
Gasket
The gasket around the perimeter of the door may harden over a period of time. It should be replaced if it
becomes difficult to close the door or if air starts to leak in around the perimeter of the doors, causing the
fire to become a little less controllable. An ARTE® rope gasket kit is available on your local ARTE® dealer.
Internal parts that need maintenance
The components that are in the flame route - consisting of the vermiculites, the ceramic glass and steel
baffle - are subject to extreme stress because of the heat produced by the fire. Occasionally, some of these
parts may have to be replaced as part of routine maintenance.
The smoke deflector should be cleaned, once a year, with a brush (Fig. 30).
All the components that are in the flame route, the gasket and the paint finish are not
covered by the warranty.
Fig. 29: Open the door for cleaning Fig. 30: Cleaning the smoke deflector
All of these service parts can be bought from your ARTE® dealer, and we recommend that damaged parts
are replaced as soon as possible to avoid consequential damage.
Internal wear accelerating factors
Regular overheating
Accumulated soot and ashes
Always remember that the fireplace must be allowed to cool down prior to cleaning it.
The ash must be completely cool before it is removed from the fireplace. Be aware that
embers in the ash can remain hot up to 24 hours after the fire has gone out.
Should the baffle be distorted by overheating, the fireplace will still function, although its efficiency may be
compromised. Please replace it as soon as possible.
••••
Cleaning the fireplace and the flue
When wood is burned slowly, it produces tar and other organic vapors, which combine with emitted
moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue. As a result,
creosote residue accumulates on the flue lining. When ignited this creosote makes an extremely hot fire.
Initially, do a monthly check for the presence of soot above the deflector plate and around the outlet flue.
If the fireplace suddenly start operating slowly check for intense presence of soot around the flue collar or in
the flue / chimney.
!!!!
!!!!