ARTDEV AS-7210 V2, Руководство пользователя

Страница: 26 / 99

22
5-3 System Setting
5-3-1 Bluetooth Functionalities
The terminal can be configured to send data to a PC/Notebook/PDA/other instrument which has an
integrated Bluetooth module or is connected with an external Bluetooth USB adapter. A diagram of
Bluetooth functionalities and a table of various Bluetooth profiles are shown below, respectively:
Table 5-1 Various Bluetooth profiles
HID Keyboard The terminal connects to the PC/host via Bluetooth and behaves like a keyboard.
The terminal accepts incoming connection requested from a remote device and is
the slave.
SPP The terminal connects to the PC/host via Bluetooth and behaves like there is a
serial connection.
BLE slave A Bluetooth 4.0 device will pair with the terminal, so that the terminal can transfer
data with low power.
Cradle The terminal connects to the PC via cradle and behaves like a keyboard.
Note: Bluetooth-enabled smart phones and PDAs can host the terminal in general. However, ordinary
mobile phones with Bluetooth function can not be a host of the terminal because in most cases neither
HID nor SPP profile is supported by them.
5-3-1-1 Configure Bluetooth HID Keyboard profile communication
Note : make sure the Bluetooth module of the terminal is powered on (blue LED is on) and the selected
profile is HID Keyboard.
Step 1: Plug a Bluetooth USB adapter into the USB port of the computer.
Step 2: Double-click the Bluetooth icon at the right bottom corner on Windows 7 ( ).
Step 3: Click Add to search devices nearby.
Step 4: Select the terminal you want to connect and then click Next .
Step 5: You can change the name through the terminal(System Information-> Bluetooth Info)
Step 6: The terminal uses the simple pair mode. If a pair code popping, you can directly select
YES and
click Next , and then you can finish the connection.