Art RP-1, Руководство пользователя

Страница: 5 / 16

2
FEATURES
•
Very low noise mic preamp
•
Switchable Low Cut Filter
•
Variable Impedance control
•
Adds at least 20dB of gain to your mic
•
Low THD discrete circuitry
•
Runs off a Phantom power supply
•
Able to drive long balanced cables
•
Compact rugged package, extruded chassis
•
Designed and developed in the USA
INSTALLATION and OPERATION
Connect the outputs of the RP-1 to a Phantom powered source
such as a mixer or preamplifier.
Connect the RP-1 input to your Ribbon or dynamic mic.
Make sure you start with the gain pot set to their minimum
setting. Once connected engage the Phantom power and
adjust the gain on the RP-1 for the desired level.
The
phantom power will not pass through to the input thus
avoiding any potential damage to any dynamic or ribbon
mic.