Art-Tech Diamond 1000, Инструкция по эксплуатации

Страница: 11 / 17

9
BINDING YOUR TRANSMITTER AND RECEIVER
PLEASE NOTE: The binding procedure has been completed at the factory.
This guide is only required if your radio requires re-binding.
5. Press the transmitter’s bind button again
to switch to normal mode. The transmitter’s
LED will flash red and green. After 5 seconds
it will go solid green.
6. The receiver’s LED will go solid again.
Your transmitter and receiver are now
bound and ready for use.
4. Unplug the bind plug, the receiver’s
LED will flash.
2. Press the transmitter’s bind button to
set the transmitter to ‘BIND’ mode.
Turn on the transmitter.
1. Plug the bind plug into the receiver’s
BATT socket. Connect a power source to
the receiver (via ESC or receiver battery).
The receiver’s LED will flash.
3. The LED on the receiver will go out,
this indicates that the bind was
successful.