Page 8 · 5400 Series
TECSource
User’s Manual
Ventilation
The
TECSource
has vent holes on the rear and left side of the unit. You must
not block these vent holes, or overheating may occur, causing damage to the
unit.
Rack Mounting
The rack mounting kit (
p/n 1403-RM
) for standard 19” racks are available for the
TECSource
. Because the unit draws air from the side, and therefore inside the
rack housing, be sure that the internal rack ambient temperature (which will
typically be several degrees higher than room ambient) does not exceed the
unit’s operating temperature.
Warm-up and Environmental Considerations
In order to achieve the highest level of accuracy, the
TECSource
should be
powered on for at least one hour prior to taking measurements. In addition,
ensure that the unit is not operating outside the ambient temperature range or
humidity conditions.
NOTE
As the unit nears maximum load conditions, it is normal
for the internal fan to significantly increase in speed.
CAUTION
Do not operate the unit above +40°C ambient, and
ensure the instrument is properly ventilated, or the unit
may overheat and possible damage to the instrument
may occur.
Содержание TECSource 5400 Series
Страница 1: ......