Model assembly
05
Linkage rod installation
2. Install the pushrod to the control horn on the
vertical stabilizer as shown.
1. Install the pushrod to the control horn on the
horizontal stabilizer as shown.
1.With the airframe inversed, install the landing gear
and holder components into the slots on the fuselage
as shown.
2. Secure the landing gear onto the fuselage with the
included screws.
Landing gear installation
Horizontal stabilizer installation
3. Secure the horizontal tail in place using the
included screws.
1. Slide the horizontal stabilizer spar into the pass through
at the rear of the aircraft.
2. Install the 2 piece (left and right) horizontal stabilizer as
shown.Ensure the control horn faces down.
HKM3.0*16mm
HKM3.0*16mm
Содержание Zivko Edge 540
