RECOMMENDED MAINTENANCE
1. Add grease through the grease nipples as needed.
2. Every 6 months:
a. Check bolts to ensure they are tightened properly.
b. Spray brake cleaner on a rag and wipe the lockbox shaft while opening and closing
the head holder.
TROUBLESHOOTING GUIDE
If you have a problem with your Head Holder, please consider the following tips or call us at
1-877-275-6075.
PROBLEM: HEAD HOLDER IS TOO TIGHT
SOLUTION:
1. Spray WD-40 Dry Lube on a rag. Wipe the lockbox shaft while opening and closing the
head holder to work the lubricant in.
2. Spray WD-40 Dry Lube directly on the pivot points.
3. Add grease through the grease nipples.
PROBLEM: HEAD HOLDER IS SLIPPING
SOLUTION:
1. Clean the Lock Box shaft and inside the Lock Box with brake cleaner to remove
build-up.
a. Thoroughly clean all parts of the lock, including wiping down the shaft with brake
cleaner.
2. Open and close the Head Holder a few times, then confirm that all build up is removed.
Repeat Step 1 if necessary.
3. Using the Head Holder operation handle, close the Head Holder half-way.
4. Pull on the Head Holder to test the security of the lock.
a. If the lock continues to slip, contact Arrowquip Client Care to determine if
replacement parts are needed.
b. If the locks are secure, move on to Step 5.
3 | RECOMMENDED MAINTENANCE
USE WD-40 DRY LUBE ONLY. USE OF OTHER
LUBRICANTS, INCLUDING OTHER WD-40 MAY CAUSE
MALFUNCTION OF THE HEAD HOLDER.
Содержание Q-CATCH QC920
Страница 2: ......
