5 | YOKE GATE & SQUEEZE CONVERSION
4
Tilt the screwdriver/pry bar up and into the yoke gate roller. This will push down the
spring, releasing the locking mechanism on the yoke gate door.
YOKE GATE & SQUEEZE CONVERSION
Only applicable to Q-Catch 87 and 74 Series Models. The Q-Catch 54 Series cannot be
converted and must be ordered with the appropriate working side from the factory.
Arrowquip squeeze crushes can be ordered based on your preferred operating side. In the
rare event that you would need to operate the yoke gate and squeeze on the opposite side,
please contact your local dealer for additional parts and follow these instructions.
ADDITIONAL PARTS TO ORDER
Required Tools:
- 9/16" wrench
- 3/4" wrench
Left-Hand Product Code
Right-Hand Product Code
Squeeze Fandangle
2003192
2003716
Squeeze Lockbox
2000355
2002384
- 15/16" wrench
- 3/8" hex key
