Arrow VM1012-C1, Руководство пользователя и инструкции по сборке

Страница: 28 / 35

28
Step 15
SW28
●
Parts Needed For
●
Right Roof Panel
● ●
● ● ●
9086 Right Roof Panel (1)
Installing the roof panels is best done
with a step ladder. Begin installing
roof panels at the back right corner of
the building. Each screw and bolt in
the roof requires a washer.
NOTE
Measure the building diagonally
again and make adjustments to
make sure the building is square
and level. This will make the roof
panels fit better, and holes will
align.
NOTE
If a Roof Beef-Up Kit was
purchased, assemble prior to
attaching the roof panels.
1
Locate all the roof panels by their
numbers and place them on the
ground alongside the building in their
proper positions.
2
Position the right roof panel at the
back right corner and fasten to the
gable and roof beams using screws
and bolts as shown.
Do not fasten the
lower end of the panel to the side wall
angle at this time.
Hint: Follow the fastener
sequence shown, for proper
alignment.
STEP
STEP
2
1
9086 Right Roof Panel
10
thru
13
1 2
3
4
5
6
7
8
9
10
9087
7743
7743
7743
9086
9086
7743
7743
7743
9087
Front
Nut
Bolt
Washer
Gable
FRONT
9 8
7 6
1
2
3
4
5