Arrow VM1012-C1, Руководство пользователя и инструкции по сборке

Страница: 27 / 35

●
Parts Needed For
●
Roof Beam/Braces
Step 14
SW27
● ●
● ●
●
Main Roof Beam Assembly (1)
● ●
● ●
●
Single Roof Beam Brace Assembly (2)
● ●
● ●
●
9204 Roof Beam Brace (2)
27
1
Wrap the weather stripping tape
around the two joined edges of the
left and right gables. See diagram.
Cut the weather stripping to length
and repeat on next gable set.
2
Spread the two halves of the double
roof beam and fasten to the gable
brace of the front gable.
3
Fasten the other end of the double
roof beam to the gable brace of the
rear gable.
STEP
6
STEP
2
Roof Beam Brace 9204
STEP
7
Roof Beam Brace 9204
4
Fasten the single roof beams ,
small holes on top, as shown using
bolts and nuts.
5
Fasten a roof beam brace to the
double roof beam behind the front
gable by placing the tab on the end of
the brace
between the roof beams.
Align the tab with the second hole
and fasten the brace with a bolt and
nut.
6
Fasten the lower end of the roof
beam brace to the track support
with a bolt and nut.
7
Fasten a roof beam brace be-
tween the rear gable and the roof
beam at the
first hole, as shown.
STEP
5
STEP
4
STEP
3
Roof Beam (Single)
STEP
1
Weather Stripping
Spread Two Halves
Of Roof Beams
Roof Beam (Double)