background image

Safety precautions are important to follow throughout the construction of your building.

•Care must be taken when handling various 

pieces of your building since some contain 

sharp edges. Please wear work gloves, eye 

protection and long sleeves when assembling 

or performing any maintenance on your 

building.

•Practice caution with the tools being used in 

the assembly of this building. Be familiar with 

the operation of all power tools.

•Never concentrate your total weight on the 

roof of the building. When using a step ladder 

make sure that it is fully open and on even 

ground before climbing on it.

•Keep children and pets away from worksite 

to avoid distractions and any accidents which 

may occur.

•Do not attempt to assemble the building if 

parts are missing because any building left 

partially assembled may be seriously damaged 

by light winds. Call 1-800-851-1085 or assist@

arrowsheds.com

•Do not attempt to assemble the building on a 

windy day, because the large panels acting as a 

"sail", can be whipped about by the wind making 

construction diffi cult and unsafe.

SAFETY FIRST....

     A05

safety edge

safety edge

sharp edge

sharp edge

Содержание RH1014-C1





































Отзывы: