The front floor frame is made up of
three pieces. The rear floor frame is
made up of two pieces. The holes in
these pieces will align when the
pieces are positioned with correct
amount of overlap. The illustrations
below show the proper overall length
for the front and rear. Proceed as
follows:
1
Place the
front floor frames
as
shown. Center the
ramp,
with drain
holes facing outside,
on top of the two
front floor frames. Join the frames by
inserting eight screws.
2
Overlap the
rear floor frames
as
shown. The holes in these pieces
will align when the pieces are posi-
tioned with correct amount of over-
lap. See the illustrations below for
the proper overall length of the rear
floor frame. Join the frames by insert-
ing five bolts into frame set as shown.
3
Double check the length of each
and set these pieces aside for later
use.
14
Step 1
B14
●
Parts Needed For
●
Floor Frame Assemblies
●
●
●
●
●
8941 Ramp (1)
●
●
●
●
●
9379 Front Floor Frame (2)
●
●
●
●
●
9377 Rear Floor Frame (2)
9379
STEP
1
8941
Front Floor
Frame Assembly
95 7/8" 243,5 cm
STEP
2
9379
9377
Rear Floor Frame
95 7/8" 243,5 cm
9377
95 7/8" 243,5 cm Front
95 7/8" 243,5 cm Rear
STEP
3
9377
9379
8941
9379
DRAIN HOLES FACE
OUTSIDE
Содержание EH86-A
Страница 7: ...THIS PAGE WAS LEFT BLANK INTENTIONALLY 7 ...
Страница 8: ...THIS PAGE WAS LEFT BLANK INTENTIONALLY 8 ...
