Arrow 0026862111746 Скачать руководство пользователя страница 3

Страница: 3 / 29

SAFETY & MAINTENANCE

Safety precautions MUST be followed at all times throughout the construction of your building!

Care must be taken when handling

various pieces of your building since

many contain sharp edges. Please

wear work gloves, eye protection and

long sleeves when assembling or

performing any maintenance on your

building.

Practice caution with the tools being

used in the assembly of this building.

Be especially familiar with the

operation of all power tools.

Keep children and pets away from the

worksite during construction and until

the building is completely assembled.

This will help avoid distractions and

any accidents which may occur.

NEVER concentrate your weight on

the roof of the building. When using

a step ladder make sure that it is

fully open and on even ground before

climbing on it.

Do NOT attempt to assemble your

building on a windy day. The large

panels can catch the wind like a “sail”,

causing them to be whipped around

making construction difﬁ cult and

unsafe.
Do NOT attempt to assemble your

building before double checking that

you have all the parts indicated on the

parts list as well as all hardware. Any

building left partially assembled may be

seriously damaged by even light winds.

IMPORTANT NOTE ON

ANCHORING

• Your building MUST be anchored to

prevent wind damage. See anchoring
page for more info.
• You must also have a temporary

anchoring system in place in case you

need to take a break from assembly.

03BQ

Exterior Care:

For a long lasting ﬁ nish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing

to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or

coastal climate region.
Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage. Corrosive chemicals

such as fertilizers, pesticides and herbicides should be cleaned off the interior and exterior surfaces immediately. Rust caused by chemical

damage is not covered by the warranty.
Rust protection precautions may help to stop rust from developing, or stop it quickly as soon as it appears.
• Avoid nicking or scraping the coating surface, inside and out.
• Keep roof and base perimeter free of debris and leaves which may accumulate and retain moisture. These can do double damage since

they give off acid as they decay.
• Touch up scrapes or nicks and any area of visible rust as soon as possible. Make sure the surface is free of moisture, oils, dirt or grime and

then apply an even ﬁ lm of high quality touch-up paint.

• Various paint manufacturers provide products for rust treatment and coverage. If surface rust does appear on your shed we recommend

treating those areas as soon as possible, following the paint supplier of your choice instructions.

• Our customer service department can provide the paint tinting formula for matching the color of your shed. We also have touch-up paint

available for repairing small nicks and scratches.

Roof:

Keep the roof clear of leaves and snow. Heavy amounts of snow on the roof can damage the building making it unsafe to enter.

Fasteners:

Regularly check fasteners and retighten as necessary.

General:

Wash off inked part numbers on coated panels with soap and water.

Please note, Manufacturer cannot be held responsible for any consequences due to buildings that are not installed per these instructions, or
for damage due to weather conditions or acts of God.

Keep these assembly instructions and owner’s manual for future reference.