6
Step 11:
Studs
24
24P
You will need for this page:
Following dimensions, measuring from the end of angle, position a
Stud Assembly
inside top
angle and fasten with one (1)
Stone Screw
through the lower hole of angle.
1
(QTY: 10)
SS
Do not fasten
at this time.
Place bottom of
Stud Assembly
over
Floor Frame
as shown. Do not fasten bottom at this
time. Repeat procedure for the remaining
Stud Assemblies
around the building.
2
Assemblies from step 3:
• Stud Assemblies (10)
10 15/16”
(27,8 cm)
27 1/16” (68,7 cm)
43 3/16” (109,7 cm)
11 5/16” (28,7 cm)
35 5/16” (89,7 cm)
Inside
Outside
