Arrow Storage Products EPA64, Инструкция пользователя и руководство по сборке

Страница: 26 / 32

26
You will need for this page:
Step 13: Door Installation & Adjustment
From inside the building, put the
bottom of the right door assembly
(on your left when you are inside)
behind door jamb into the front
fl oor frame track.
1
3
Fasten the door to the door
slides using two #10Bx1/2” (13
mm) screws per door slide.
2
Position the top of the door so
that the holes in the door line up
with the holes in the door slides.
26BL
4
Repeat steps 1 through 3 for the left door.
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
Closed Position
Half-Open Position
INSIDE BUILDING
Front Floor Frame
Door
Door Slide
Door Track
Gable
If Doors do not align, raise or lower one side of the Door by placing
the Door screws through a different set of holes in the Door Slide.
Door Adjustment
Assemblies from Step 12:
• Right Door Assembly (1)
• Left Door Assembly (1)
(QTY: 8)