background image

Owner's Manual & Assembly Instructions

723380617

 

                                                              Exterior Dimensions                           Interior Dimensions                              Door

             *Approx.                              Base                           (Roof Edge to Roof Edge)                             (Wall to Wall)                                Opening

                   Size                                  Size                          Width        Depth       Height                Width       Depth      Height              Width     Height     

                  8' x 6'                   97 1/2" x 68 3/4"             99 3/4"       71 1/4"       79 1/8"              94 3/4"         66"         77 7/8"            43 1/2"     69 1/4"       

  Storage Area:     43 Sq. Ft.      271 Cu. Ft.

 

                  4,0 m

2

            7,7 m

3

 

 

BUILDING DIMENSIONS  * Size rounded off  to the nearest foot

        2,4 m x 1,7 m           247,7 cm x 174,6 cm           253,4 cm      181,0 cm      201,0 cm            240,7 cm     167,6 cm    197,8 cm          110,5 cm    175,9 cm

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

 

BT01

               ED86    WR86   WR86EU   ED86AP 

               ED86Z   SBVD86 A   697.68616 A

                   VD86 A      VD86EU A   VDGY86 A   

               VDGY86EU A 

Model No.

Содержание 697.68616A

































Отзывы: