background image

© 2014  Arrive Systems, Inc. All Rights Reserved.

4

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK). NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO QUALIFIED 

PERSONNEL

 

Explanation of Graphical Symbols

This graphic symbol is intended to alert you to 

the presence of uninsulated “dangerous voltage” 

within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric 

shock to persons

 

This graphic symbol is intended to alert you the 

presence of important operating and maintenance 

accompanying the appliance.

1.  Read Instructions- All the safety and operating instructions 

should be read before you operate the product.

2.  Retain Instruction-The safety and operating instructions 

should retained for future reference.

3.  Heed Warnings- All warnings on the product and in the 

operating instructions should be adhered to.  

4.  Follow Instructions- All operating and use instructions should 

be followed. 

5.  Cleaning- Unplug this product from the PC before cleaning. Do 

not use liquid cleaners or aerosol cleaners.

6.  Attachments- Do not use attachments not recommended by 

the product manufacturer as they can cause hazards.

7.   Water and Moisture- Do not use this product near water- near 

a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet 

basement; or near a swimming pool; and the like. 

8.  Accessories- Do not place this product on an unstable cart, 

stand, tripod, bracket or table. The product may fall, causing 

serious injury to a child or adult, and serious damage to 

the product. Use only with a cart, stand, tripod bracket, or 

table recommended by the manufacturer or sold with the 

product. Any mounting of the product should follow the 

manufacturer’s instructions, and should use a mounting 

accessory recommended by manufacturer. 

9.  A product and cart combination should be moved with care. 

Quick stops, excessive force, and uneven surfaces may cause 

the product and cart combination to overturn.

10. Power Sources- This product should be operated only from the 

type of power source indicated on the mark.

11.  Cable Protection- All connected cables should be routed so 

that they are not likely to be walked on or pinched by items 

placed upon or against them, paying particular attention to 

cords at plugs, convenience receptacles, and the point where 

they exit from the product. 

12. Lightning- For added protection for this product during a 

lightning storm, or when it is left unattended and unused for 

long periods of time, unplug it from the PC and/or from the 

power socket. This will prevent damage to the product due 

to lightning. 

13.  Object and liquid entry- Never push objects of any kind into 

this product through openings as they may touch dangerous 

voltage points or short-out parts that could result in a fire or 

electric shock. Never spill liquid of any kind on the product. 

14. Servicing- Do not attempt to service this product yourself as 

opening or removing covers may expose you to dangerous 

voltage or other hazards. Refer all servicing to qualified 

service personnel.

15. Damage Requiring Service- Unplug this product from the PC 

and/or power socket and refer servicing to qualified service 

personnel under the following conditions :
a)  When the connecting cable is damaged,
b)  If liquid has been spilled, or objects have fallen into the 

products,

c)  If the product has been exposed to the rain and water,
d)  If the product does not operate normally by following the 

operating instructions. Adjust only those controls that 

are covered by the operating instructions as an improper 

adjustment of the controls may result in damage and will 

often require extensive work by a qualified technician to 

restore the product to its normal operation,

e)  If the product has been dropped or damaged in any way, 

and

f)  When the product exhibits a distinct change in 

performances- this indicates a need of service.

16. Replacement Parts- When replacement parts are required, 

be sure the service technician has used replacement parts 

specified by the manufacturer or have the same characteristics 

as the original part. Unauthorized substitutions may result in 

fire, electric shock, or other hazards.

17. Safety Check- Upon completion of any service or repair to this 

product, ask the service technician to perform safety checks to 

determine that the product is in proper operating condition.

18. Heat- The product should be situated away from heat sources 

such radiators, heat registers, stoves, or other product 

(including amplifiers) that produce heat. 

Содержание AVP-1000



















Отзывы: