© 2014 Arrive Systems, Inc. All Rights Reserved.
13
■
Managing the Call
1. Adjusting the sound volume of the speaker
During the conference call, if the sound volume of the speaker is too low or too high, you can press
the “VOL +” or “VOL -” button of the AVP-1000 repeatedly to adjust it to a suitable level. If the sound
volume is still not proper, you can adjust the sound volume of the speaker on the Software Codec.
2. Adjusting the sound volume of the microphone
During the conference call, if the sound heard by the remote participant is too low or too high, you
can ask the remote participant to adjust the sound volume of the receiver. If it’s still not proper, you
can adjust the sound volume of the microphone on the Software Codec.
3. Mute the microphone
During a conference call, press the “Mute Microphone” button on the unit to mute voices or other
sounds that can be picked up by the microphone. The mute indicator of the microphone on the main
unit will be on while the arrow LED pointing to the microphones will be off. At this time, you can still
hear the voice of the remote participant, but the remote participant cannot hear your voice. To cancel
the mute status, please press the button “Microphone Mute” of the main unit again. At this moment,
the mute indicator of the microphone will be off while the indicator of the working microphone will
be on.
4. Select the pick-up direction of the microphone
By default the three microphones are on when the AVP-1000 is started up. On pressing the button
“MIC ZONE” in turn, it will select the pick-up direction of the microphone in sequential order. Press the
button once, twice, thrice, it will select each single microphone clockwise from left to right. Press the
button again to return to the original status (see Figure1). The LED for the active microphone(s) will
turn on. This feature is useful when you have all the people in the room facing one specific direction.
Attention:
Please cancel the mute function before enabling the microphone.
5. Mute the speaker
During the conference call, press the button “Speaker Mute” to turn off the sound of the speaker,
and the mute indicator of speaker will turn on. To turn on the sound of the speaker, please press the
button again and the mute indicator of speaker will turn off.
6. End the conference call
In accordance with the operation instructions of the VoIP Call or Conference software,end the call
with the remote participant to end the VoIP Call or Conference. The AVP-1000 does not have a call
end button or a call pick-up button since the unit is a physical audio component extension of an
Arrive FacePoint EMP, where controls are enabled via a touch screen tablet that includes the ability to
receive and make calls.
Attention:
If malfunction occurs during use, unplug the USB cable from the unit to turn it OFF.
Re-insert the USB cable to restart the AVP-1000.
