Chapter 4
:
Battery Installation and Removal
Release 32 STANDARD 1.2 August 2016
Touchstone TM3202G Telephony Modem User Guide
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved.
20
4.
Replace the door. To do so, place the tabs of the battery door into the slot inside the
Telephony Modem battery compartment. Rotate the door toward the front of the
Telephony Modem until the latch snaps back into place.
1 - Battery Compartment
2 - Hinge Tabs
3 - Receiver Slots
Note: Telephony Modems use a Lithium-Ion battery pack. Please recycle or dispose of the
battery responsibly and in accordance with local ordinances.
Maximum Battery Installation and Replacement
This model of the Telephony Modem has the ability to provide continued telephone service
during power outages. The battery backup is not intended to take the place of AC power.
Use this procedure to install and to replace the backup battery.
1.
Press down and pull back on the latch holding the battery door (on the bottom of the
Telephony Modem). Pull the door toward you. Set the door aside in a safe place.
1 - Latch End
2.
Place the battery on a firm horizontal surface.
3.
Position the Telephony Modem over the battery, aligning the slots on the battery bay with
the tabs on the battery. Push straight down on the Telephony Modem until the battery
latch clicks into place.
