DRAFT
Chapter 5
:
Configuring Your Ethernet Connection
Release 34 DRAFT 1.6 June 2017
Touchstone DG3450 Data Gateway User Guide
© 2017 ARRIS Enterprises LLC. All Rights Reserved.
26
The Network Connection window displays a list of LAN connections and associated
network adapters.
2.
Double-click the local area connection to be used for your device’s network connection.
The Local Area Connection Status widow displays.
3.
Click
Properties
.
4.
Select
TCP/IP
by clicking it one time. Then click
Properties
.
5.
Click the
General
tab. Then click
Obtain an IP address automatically
and click
OK
.
6.
Click
OK
to accept the new settings, and
OK
again to close the Properties window.
7.
You may have to restart your computer in order for your computer to obtain a new IP
address from the network.
TCP/IP Configuration for Windows Vista
Follow these steps to configure the Ethernet interface on a Windows Vista operating system.
1.
Open the Vista Control Panel.
2.
Double-click
Network and Sharing Center
to display the Network and Sharing Center
Window.
3.
Click
Manage network connections
. If prompted for a connection, choose
Local Area
Connection
.
The Network Connections window displays.
4.
Double-click the
Local Area Connection
to open the Properties window:
Note:
If Windows requests permission to continue, click
Continue
.
5.
Double-click
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv4.
Note:
If your cable provider requires TCP/IP version 6, double-click
Internet Protocol
Version 6 (TCP/IPv6)
to configure TCP/IPv6.
The TCP/IP properties window for the version you selected displays.
6.
For either TCP/IPv4 or TCP/IPv6, select
Obtain an IP address automatically
and
Obtain
DNS server address automatically
, unless instructed otherwise by your cable provider.
7.
Click
OK
to accept the new settings and close the Properties window.
TCP/IP Configuration for Windows 7, Windows 8,
or Windows 10
Follow these steps to configure the Ethernet interface on a Windows 7, Windows 8, or
Windows 10 operating system.
