DRAFT
Chapter 4
:
Installing and Connecting your Data Gateway
Release 34 DRAFT 1.6 June 2017
Touchstone DG3450 Data Gateway User Guide
© 2017 ARRIS Enterprises LLC. All Rights Reserved.
23
from the Show drop-down, then click the Airport tab. The “Airport ID” field shows the MAC
address.
Linux:
open a shell window and type
/sbin/ifconfig
(and press Enter). The wireless
interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0).
Making Your Parental Control Settings
Follow these steps to set up your Parental Controls:
1.
Access and log into the wireless configuration interface as explained in Accessing the
Configuration Interface.
2.
Click the
Firewall
tab and then click
Parental Controls
in the side menu to display the
Parental Controls screen.
3.
Check the
Enable Parental Controls
checkbox and click the
Apply
button.
4.
Configure any or all of the following parental controls:
Trusted MAC Addresses:
Enter the MAC addresses of any “trusted” computers on the network and click the
Apply
button. You can add two trusted computers. Once added, these trusted computers will
not be affected by the parental control settings. For example, you may want the
computers of the father and mother to be trusted, while the childrens’ computers have
parental controls in effect.
Note:
Refer to the
Finding the MAC Address of a Computer
(page 22) for information on
determining the MAC address of your computer.
Keyword and Web Site Filtering:
