Connecting
Your DCX Set-top
with OCAP Software DCX3510-M
•
User Guide
8
365-095-25385-x.1
Connecting Your DCX Set-top
Instructions and diagrams are included for the following connections:
•
High-Definition Television (HDTV)
•
A/V receiver — Audio
•
Standard-Definition TV (SDTV)
•
Standard-Definition TV (SDTV) and VCR/DVD Recorder
•
A/V receiver, Standard-Definition TV (SDTV), and VCR/DVD Recorder
Before you move or change components on your entertainment system, review the following:
•
For basic cable connections, use 75 ohm coaxial cables equipped with F-type connectors
•
Disconnect power from your equipment before connecting or changing cable connections
For information on connecting to an HDTV, see Video Connection Options.
Caution:
Do not place anything on top of your DCX set-top, especially other home entertainment
components. Be sure to provide adequate ventilation to prevent overheating.
Video Connection Options
The DCX set-top offers several different video connection options. Component video, HDMI,
and IEEE-1394 allow you to view both High-Definition and Standard-Definition TV
programming. Composite video connections allow you to view only Standard-Definition TV
programming. HD programming will be down-converted to SD format for SD outputs.
To determine whether your TV features component video, HDMI, IEEE-1394, or composite
video, check the manual supplied with your TV.
Use the guidelines below to determine the best video connection for your home
entertainment system.
Note: Only one video connection to the TV is required. HD video can only be viewed with HDMI, IEEE-
1394, or component video connections.
4