ARRIMAX
– Service Manual
Page 6 of 20
Safety Switch Activator (SSA)
Set the Focus to Spot. The reflector is now in
position to open the lens door.
Loosen 1 screw (1.5 mm Allen key) directly
below the SSA. Do not remove.
Now you can move the SSA forward or
backwards to find the right adjustment.
To adjust:
•
Allow a small amount of play (C) when
the silver pin (A) contacts the activator
(B).
•
When closing the door listen for a
‘click’ sound.
•
It should ‘click’ twice before the door
latch closes completely
If this is not adjusted properly than the safety
loop can be opened, and the lamp will not
strike.
Note: You can also measure the safety loop
refer to the wiring diagram.
Important: If the door latch is not adjusted
properly this affects the SSA function.
A B
C
