25
Instructions
3.15 Adding Optional Bottom Flag Holders
• If a bottom flag is needed, the top/bottom flag can be fitted to the bottom of the matte
box using two optional flag holders.
• Usa a hex driver 3 to mount each of the bottom flag holders to the bottom of the basic
module using two screws.
3.16 Insert Mattes
• Mattes come as a set of five different pieces and can be secured to the front of the
matte box by simply pressing on the hood`s four securing tabs.
• Place the matte of your choice at the front of the sunshade. The labelling of the matte
must face away from the matte box with the ARRI logo on top.
• Engage the matte by pressing on the four catches around the sunshade until they
audibly lock.
• To remove: Ease the matte off the four catches and pull it away from the sunshade.
To fit the top/bottom flag at the bottom position, you should use the optional flag
holders (pair) (Ident No.: K2.0013825)
NOTICE
Due to the variety of sensor sizes and lens properties, you are advised to test
mattes numbered from 1 to 5 and lens coverage with your own equipment.
NOTICE
