18
3.11 LMB 4x5 Swing Away Tilt Module
The module offers a comfortable swing away with extension for easier lens changes as
well as an integrated tilt module for 10° up and down rotation.
• Secure the swing away tilt module tool with the three metallic screws at the right side
of the basic module (Fig. 1).
• For better security, use a 3 mm hex screwdriver to tighten the screws.
Fitting the matte box on rods
• Unlock the 15 mm or 19 mm support by turning the butterfly nut counter-clockwise.
• Slide the matte box onto the rods.
• Lock both rods and the matte box by turning the butterfly nut clockwise.
Horizontal adjustment
• Unlock the two 3 mm screws at the right side of the tilt module (Fig 1).
• Adjust the matte box into the desired positioning (Fig. 2).
• Mark the position with the two screws.
• Use the marker if you want to go back to the original position.
Fig. 1
Fig. 1
Fig. 2
Instructions
