4
ARRIHEAD
Safety Specifications
Danger of injury or equipment damage
possible.
• The ARRIHEAD II has been thoroughly tested with
regard to its safety and quality of workmanship.
• In order to ensure optimal performance, follow
the operating instructions described herein.
• The general safety regulations as well as the ser-
vice and maintenance procedures mentioned in
this manual should be carefully followed.
• The ARRIHEAD II should be assembled only by
qualified personnel, familiar with the procedures.
• Only original ARRI accessories and replacement
parts should be used.
• To transport the ARRIHEAD II: set both gear se-
lector switches in neutral and all friction levers
and locks in open position.
• Remember to remove the hand wheels before
setting the ARRIHEAD II directly on the floor or
other surface without tripod base.
• The serial number of the ARRIHEAD II is located
on the base.
