ARRICAM Studio Quick Guide 01/2004, Page 13 of 20
Both Studio and Lite magazines can be used on either Studio or Lite cameras by means of the appropriate
adapter. Reverse running is only possible when using Studio magazines. The use of an adapter is always
necessary for mounting a magazine on the ARRICAM Studio.
Mounting Studio Magazines
There are three possible positions to mount Studio magazines on the ARRICAM Studio:
1. Top mounted with the Top Load Adapter or with the Dual Port Adapter e.g. for use with a geared/fluid head.
2. Inclined at the rear with the Dual Port Adapter e.g. for shoulder operation or use with a geared/fluid head.
3. Vertically at the rear with the Back Load Adapter e.g. for handheld or Steadicam operation.
Mounting Studio Magazine Adapters
Each Studio Magazine Adapter is secured with six screws tightened by means of a 3mm metric hex wrench.
Magazine Configurations
Top Load
Adapter
Back Load
Adapter
Dual Port
Adapter
Lite Mag to Studio Camera Adapter
Mounting Lite Magazines
Both the Lite Steadicam Magazine and the Lite Shoulder Magazine may be mounted on the Studio Camera by
means of the Lite Mag to Studio Camera Adapter. This is attached to the camera in the same way as the other
adapters.
