SixPak Manual rev. 16.1
–
September 12, 2016
Page 5
controller. Set up your radio 1 and radio 2 addresses in the BandMaster IVs. Pres
the Auto buttons to allow the band decoders to take over.
4.
If you want to use the unit from a PC plug in the USB cable to the PC. This uses the
FTDI driver. Download the Control Center Softare and set up to the instructions in
this link
http://www.hamation.com/?ControlCenter.html
Note: The dual controllers are good to use with radios that are installed side by side and
the operator(s) can reach the controller. Otherwise, the individual controllers shown below,
like the RatMaster, the PushButton or even the Rotary controller for the SixPak can be
used at each operating position.
RatPak Rotary Controller:
https://www.arraysolutions.com/ratpak-rc
RatPak Push Button Controller:
https://www.arraysolutions.com/ratpak-pbc
