Revision 1.5 November 21, 2011
P a g e
|
15
Default Antennas (Optional)
If you have more than one antenna on a
band the decoder gives you the ability to select
which antenna will be selected by default when
the 4-Wire Control Center software is not
running. Simply select which antenna you wish
as the default for that band. If only a single
antenna is available for a band leave the
setting at 1. Click on the Set button when
finished and the new settings will be stored in
the decoder.
This completes the configuration process. You may now close the decoder software
and start your logging program and connect to your radio.
Note: you can not run the
Bandmaster III
configuration application at the same time as a
logging/control program because you can not have two applications grabbing the same serial
port. Thus make certain your
Bandmaster III
configuration application if closed before running
any other application using your
Bandmaster III
.
