array K KW8, Руководство пользователя

Страница: 13 / 17

UP
DOWN
ENTER
MENU
KW8 Ver. 1.2
13
8. DMX CHANNELS
The unit operates using the digital DMX 512 (1990) signal. Both movement and some audio parameters
can be controlled by the 11 channels available.
8.1 DMX ADDRESSES
In order to use the unit in 11 channels, set the following addresses on the speakers connected in the
same DMX network:
K-OWL 1 A001
K-OWL 2 A012
K-OWL 3 A023
K-OWL 4 A034
K-OWL ... A... just add 11 to the previous address
To select the addresses, proceed as follow:
1. Press the UP-DOWN key until you reach the required DMX channel. The numbers on the display
will begin to flash (but the new DMX address hasn’t been set yet).
2. Press ENTER to confirm your selection. The numbers on the display will stop flashing and the
speaker will be set to the new DMX address.
Note: If the display showing the DMX address flashes, then one of the following errors has occurred:
- DMX signal not present
- DMX address not valid
- DMX reception problem