ARRADA Farringdon 16, Руководство по эксплуатации и установке

Страница: 2 / 35

PLEASE RETAIN THIS GUIDE FOR FUTURE REFERENCE
Arada Farringdon Stoves 2
PLEASE NOTE— Arada has a policy of continuous product development and therefore we
reserve the right to amend the specification without prior notice.
Due to printing cycles, items or options may be described before they are generally available
or after they have ceased, so please check with your retailer or dealer.
We recommend our wood burning stoves be fitted by an installation engineer
certified in the US by
The National Fireplace Institute (NFI)
And in Canada by the Wood Energy Technology (WETT)
Congratulations on your choice of an Arada Stove.
Read all instructions carefully before installing your wood burning stove. If you are in any
doubt about the instruction
to install your appliance correctly, we suggest to call a professional
master installer. A wrong installation may result with a fire, burns and possible death.
Keep these instructions.
This appliance must be connect to
· A HT type factory-built chimney approved UL103 or ULC 629 with a 6 inches dia. (15.24 cm)
· A code-approved masonry chimney with a flue liner with a 6 inches diameter (15.24cm)
N.B: Be warned that local codes and rules can have more specific requirements than those
detailed in this manual.
You should consult a master installer, fire officials or local building office about restriction and
installation inspection in your area and to determine if you need to obtain a permit
Prior to installation.
Install and operate this stove only in accordance with these instruction