8.
Mineral Deposits
Regular use of the kettle can leave behind mineral
deposits or cause white residue and scale build-up on
the interior of the kettle. This residue is normal and will
not negatively affect you or the unit but can impact
the quality of prepared meals/drinks over time if not
cleaned properly. Follow these steps to remove deposits
and residue:
1. Fill the kettle with 4 cups of water and 3
tablespoons of baking soda
OR
1 cup of white
vinegar
OR
½ cup of lemon juice.
2. Bring contents to a boil by following the
instructions in “Boiling Water” above.
3. Allow the mixture to soak in the kettle overnight.
4. Empty contents and rinse out the kettle
thoroughly with warm, soapy water.
5. Fill the kettle with 4 cups of water and bring to
a boil. Once boiled, empty the kettle and dry
thoroughly.
6. Repeat as needed.
Note:
· Using distilled water
will help to prevent
the buildup of mineral
deposits.
· It is recommended to
deep clean the kettle at
least once a month.
For additional recipes, visit us at
www.AromaCo.com
Bring 3 cups of water to a boil then allow the water to cool slightly.
Add hot cocoa mix packet* of your choice and ¾ cups of hot water
each to 4 heat-safe mugs. Thoroughly mix in 2 teaspoons of peanut
butter to each mug then serve.
SERVES 4.
Hot Peanut Butter Cup
4 packets*
8 tsp.
3 cups
*1 hot cocoa mix packet is approximately 1½ tablespoons
hot cocoa mix
peanut butter
hot water
Recipes
9.
Bring 4 cups of water to a boil. While the water boils, add 1 tablespoon
of honey each to 4 heat-safe mugs. Muddle together the mint and
lemon juice then evenly distribute between the mugs. Pour the boiled
water over the top of the ingredient mix in each mug then serve.
SERVES 4.
Honey Mint Tea
4 tbsp.
1-2
1
4 cups
honey
fresh mint leaves
lemon wedge
hot water
Boiling Water
1. Place the power base on a sturdy, level and dry
surface.
2. Open the kettle lid using the lid release button
and fill with water. Water must be filled between
the MIN and MAX levels.
3. Close the lid ensuring it locks into place.
4. Make sure the bottom of the kettle is completely
dry then place the kettle onto the power base.
5. Plug the power cord into an available 120V AC
wall outlet.
6. Press the power switch down to begin heating.
7. Once the water reaches a boil (212°F), the power
switch will flip up and the kettle will automatically
shut off.
8. Gripping by the cool-touch handle, lift the kettle
off the power base to serve. Do not touch the
power base as it will be hot.
9. When finished serving, pour out any remaining
water and unplug the power cord.
Note:
· Never fill the kettle with
any liquid other than
water.
· Never open the lid while
water is boiling.
· If the kettle is heated
with no water,
the internal safety
mechanism will
automatically turn the
kettle off. However, the
power switch will not
automatically return
to the OFF position.
Remove the kettle from
the power base and
fill with at least 2 cups
of water then return to
the power base. The
kettle will begin working
again once the internal
temperature has
dropped to a safe level.
