Troubleshooting
6.
The kettle will not begin heating when the
power switch is in the ON position.
· Make sure the kettle is seated properly on the
power base and that the base is connected to
a functioning electrical outlet.
· Make sure the minimum amount of water is in
the kettle. If the kettle cannot detect liquid, the
internal safety mechanism will automatically
turn the kettle off. However, the power switch
will not automatically return to the OFF
position. Remove the kettle from the power
base and fill with at least 2 cups of water then
return to the power base. The kettle will begin
working again once the internal temperature
has dropped to a safe level.
· Water or debris on the bottom of the kettle
or on the power base may interfere with the
functioning of the kettle. Be sure that the base
of the kettle and the power base are dry and
free of debris.
There are mineral deposits on the interior of
the kettle.
· A certain amount of scale build-up is normal
after use and is caused by minerals contained
in hard water.
· To remove deposits, refer to "Mineral Deposits" on
page
8
.
Note:
· Never attempt to
disassemble the kettle or
the power base.
· Never immerse the
kettle, power cord, plug
or power base in water.
· Always take care not
to allow electrical
components to come
into contact with water.
· Do not use abrasive
cleaners or scouring
pads of any kind on the
kettle or power base.
This will cause damage
to the finish and may
create a risk of electrical
shock.
Note:
· If the problem persists,
please contact our
customer service
department at
1-800-
276-6286
or by email
at
CustomerService@
AromaCo.com
.
7.
Caution:
Always unplug the
kettle and allow it to
cool completely before
cleaning.
Before First Use
1. Read all instructions and important safeguards.
2. Remove all packaging materials and check that
all items have been received in good condition.
3. Tear up all plastic bags and dispose of them
properly as they can pose a risk to children.
4. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not
fit inside the kettle, swish warm, soapy water
around in the interior of the kettle with the
kettle lid on. Take care to keep the electrical
components on the exterior of the kettle dry.
5. Rinse and drain any remaining soapy water from
the kettle.
6. With a damp cloth, gently wipe the exterior of the
kettle. Do not wipe electrical components as this
may cause damage to the unit.
7. Dry the interior and exterior of the kettle
thoroughly before placing the kettle onto the
power base.
8. Following the instructions in “Boiling Water” on
page
8
, boil 4 cups of water. Once the water has
boiled, pour it out then rinse the inside of the
kettle once more with warm water. The kettle is
now ready for use.
To Clean
1. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not
fit inside the kettle, swish warm, soapy water
around in the interior of the kettle with the
kettle lid on. Take care to keep the electrical
components on the exterior of the kettle dry.
2. Rinse and drain any remaining soapy water
from the kettle.
3. With a damp cloth, gently wipe the exterior of
the kettle. Do not wipe electrical components as
this may cause damage to the unit.
4. Dry the interior and exterior of the kettle
thoroughly before placing it back onto the
power base.
