11
10
1. Fill the Container up half way with clean water up to the 4 cup marker. For more thorough
cleaning, add two slices of lemon or a couple drops of detergent. Cover with the
Container Lid and secure the Lid Cap.
2. Set the Container firmly on the Base.
3. Set the Mode Switch to Timing and the Time switch to 35.
4. Turn the Power Knob clockwise to MAX.
5. Allow the machine to run until it stops automatically.
6. Remove the Container from the Base, remove the Container Lid, and rinse out the
Container thoroughly with clean water.
7. Dry the exterior of the Container and place it back on the Base.
8. Turn the Power Knob to MAX for three seconds to dry out the Bearings. Turn the blender
off, remove the Container, and allow it to air dry.
CLEANING AND CARE
To ensure the longevity of your Aroma Professional Blender, always make
sure to clean after each use. The blender can be cleaned easily with the
following steps:
When cleaning the appliance,
do not soak the power axel
in water .
Fill the pitcher with clean
water and start the machine
to clean it .
TROUBLESHOOTING
My blender will not start.
Double check the power cord to make sure that it is properly plugged in. Press the circuit
breaker reset button located on the bottom left of the back of the base. If the device still does
not work, call Aroma Customer Service at 1-800-276-6286.
My blender stopped suddenly mid-use and I cannot get it to start again.
It is possible that your blender has overloaded or overheated. Your Aroma Professional
Blender is equipped with an automatic overload fail-safe that automatically shuts off the
machine for safety when overloaded with electricity or heat (see page 4). To reset the unit after
an automatic shut off, simply press the circuit breaker reset button located on the bottom left of
the back of the base.
In case of overheating, simply wait 15 minutes for the motor to cool, and the unit should
resume functionality.
The blade does not rotate smoothly and the machine makes loud abnormal sounds.
The retainer nut in the Container may have come loose. Stop using immediately and contact
Aroma Customer Service at 1-800-276-6286.
•
For your safety, always make sure the Mode Switch and Power Switch are both
set to Off, and the Power Cord is unplugged before troubleshooting.
WARNING