7
6
PARTS AND FEATURES
CONTAINER LID
The Aroma Professional Blender comes with a heat resistant, easy to clean lid with an opening
to accommodate the included Lid Cap, Funnel, and Tamper. To place the Container Lid on
the Container hold it by the Lid Tab. Insert that corner into the corner closets to the container
handle then press down on the remaining corners until the Container Lid is tightly secure. To
remove the Lid, hold the Container down while lifting the Lid Tab.
LID CAP
The Lid Cap features a unique cross-shaped design to allow for ventilation, making it safe to
use while blending hot liquids while preventing splashing or scalding. With the Container Lid
secure, insert the Lid Cap by fitting the cross-shaped end into the opening and pressing down
until it is tightly secure. To remove, hold the Container Lid down with one hand while twisting
the Lid Cap until it is loose enough to remove.
FUNNEL
With the Container Lid secure, insert the narrow end of the funnel into the lid opening to make
it easier to pour liquids or finer foods into the Container without spilling.
TAMPER
Maneuver the Tamper through the opening of the Container Lid to press ingredients into the
blades.
•
To avoid splashing, potential scalding from hot liquids, and other potentially
serious injuries, make sure the Lid is always on while the machine is running.
•
Do not use the Tamper without the Container Lid to ensure that the Tamper does
not come in contact with the blades. Since the Tamper’s splash disc covers the
entire opening on the Container Lid, do not use it while blending hot foods, as this
can cause an unsafe build-up of pressure or steam.
WARNING
WARNING
PARTS AND FEATURES
BLADES
The Aroma Professional Blender comes equipped with a unique set of powerful horn-shaped
serrated blades that are suitable for both wet and dry blending. They are made of 420-J2
stainless steel hardened with an electrolytic surface treatment and spin on two rust resistant
SUS 440 zinc alloy bearings.
CONTROL PANEL
A. MODE SWITCH:
The Mode Switch has three positions: TIMING, OFF, and INFINITY. In
TIMING mode, the unit will run for the duration specified by the Preset Time Switch. In
INFINITY mode, the unit will continue to run until shut off manually. In OFF mode, the unit
will not start.
B. POWER KNOB:
The Power Knob turns the unit on and allows the user to control the
speed of the blades from MIN to MAX. The Knob is only active if the Mode Switch is set
to either TIMING or INFINITY.
C. PRESET TIME SWITCH:
The Preset Time Switch has three settings: 35 seconds, 60
seconds, and 120 seconds. When the Mode Switch is set to TIMING, the unit will run for
whichever duration the Preset Time Switch is set to.
•
Blades are sharp and can cause serious injury. Do not put hands into the
Container while the blender is on or when the Container is on the base.
•
For best results and safety, we recommend always setting the Mode Switch first
before starting the blender using the Power Knob.
WARNING
WARNING
A
B
C