DISPLAY
Quick Start Guide
Quick Start Guide
KEYS
Icon Information
PACKAGE CONTAIN
MOUNTING COMPUTER
SETTING MODE
A-Plus Meter
Bracket & Rubber
Rubber Ties X 4
Extension Arm
Hex Wrench
Micro USB Cable
Specification
Product Name
A-Plus Meter
Size
47.5 mm x 71 mm x 22.5 mm
Weight
53.2g
Operation Temperature
0ºC to 50ºC
Battery
Rechargeable Battery
Frequency
BLE4.0
Water Proof
IPX6
Tighten the extension arm on handlebar with hex
wrench, please apply the rubber pad according to the
dimension of the handlebar.
Charging Battery
1. When the function list displays: BATTERY EMPTY, it means
the device power is low and needs to recharge, the device
will force to shut down.
2. Use the USB cable in the package to charge the bike
computer.
Press Set key for 3 seconds to open setting
function.
Set A-Plus Meter
Set key:
Press Set key for 3 seconds to access or to exit the setting menu.
Use
to browse from one setting to the other.
To access the selected setting, press .
Select the desired setting with
to adjust the value and to switch interval.
Press
to go back to setting menu.
1.SET ALTITUDE
to open setting
to select
AUTO DETECT /
MANUAL SET
to confirm,
under MANUAL SET,
press
to
change number,
to change digit
to confirm
2.SET BACKLIGHT
to open setting
to select
BUTTON ON / ALWAYS
ON / ALWAYS OFF
to confirm
3.SET SENSOR
to open setting
to start
searching sensor
to change sensor
to confirm
4.SET BIKE TYPE
to open setting
to select
ROAD BIKE / MOUNT
BIKE / SMALL WHEEL
to go to SET WHEEL
to select
TIRE LIST / MANUAL
SET, Under MANUAL
SET, press
to
adjust number and
to next digit
to confirm
5.ROLLER MODE
to open ROLLER
MODE
to select On /
Off
to confirm
Attention:
Be sure to OFF Roller
Mode while riding
outdoor
6.AUTO WAKE UP
to open setting
to select On /
Off
to confirm
7.SET CLOCK
to open setting
to select
AUTO DETECT /
MANUAL SET
In AUTO DETECT
to change 12
Hour / 24 Hour.
to
GMT mode.
In MANUAL SET
to select 12
Hour / 24 Hour.
to
set clock.
to
adjust number
Press
to save
and leave.
8.LANGUAGE
to open setting
to select
language
to confirm
9.SET USER
to open setting
to select
MALE / FEMALE,
to
next setting
to adjust age,
to next setting
to select KG /
LB,
to next setting
to adjust
weight
to confirm
10.SET UNIT
to open setting
to select
Metric / Imperial,
to
next setting
to select ºC /
ºF
to confirm
11.SET KEYTONE
to open setting
to select On /
Off
to confirm
12.SET ODO
to open setting
to adjust
value to next value
to confirm
13.FACTORY DEFAULT
to open setting
To Delete, press Y
(
), to leave,
press N (
)
To Confirm delete, press
Y (
), to leave,
press N (
)
14.ABOUT
to open setting
to view next
information
to confirm
PAIRING WITH AROFLY SENSOR
1.Get ready of AROFLY Sensor
Place Wrench onto the
AROFLY Base. Twist
counter-clockwise to open
AROFLY Cap.
Pull and remove Insulation
Tab from AROFLY to
connect battery. Replace
the cap to AROFLY.
2.Enter "SET MODE" OF A-PLUS Mete
r
Step1:
Press Set key for
3 seconds to enter
"
SET
MODE
"
STEP2:
Press
to
page 4 of
"
SET SENSOR
"
Step 3:
Press to set
AROFLY Sensor
Step 4:
Press
to
SEARCH AROFLY code.
Step 5:
Wake up AROFLY Sensor for code pairing on
A-PLUS Meter
Action:
Tap AROFLY Sensor few times
to wake up AROFLY for Bluetooth
transmission. A-PLUS Meter will
automatically search AROFLY code.
AROFLY Sensor paring success:
It shows SENSOR LINK
and follows by 6 digits code.
If device fail to receive AROFLY code, it will show: ID NOT
FOUND
Please try again by the movements:
Press
to Search again. In the meantime, please
again tap AROFLY Sensor few times for signal transmission
to be searched by A-PLUS Meter.
Attention
* Please pair AROFLY Sensor with A-PLUS Meter before first riding.
* After successfully paired, please correctly install AROFLY Sensor on your bike tire valve by following AROFLY manual.
* For Reconnection, just turn on or wake up A-PLUS Meter and simultaneously wake up AROFLY Sensor by slapping your bike saddle
or vibrate your bike tire.
* AROFLY Sensor can be used either by Smart Phone of AROFLY APP (See AROFLY manual) or A-PLUS Meter. But AROFLY cannot be
used with 2 devices (Smart Phone and A-PLUS Meter) simultaneously.
: Touch to change the sub mode.
•
: Press Mode key to change to different mode:
Bike Mode
→
Cadence Mode
→
Heart Rate Mode
→
Power Mode
→
Altitude Mode
Press and hold Mode key for 3 seconds to clear trip distance, trip time.
•
: Press record key to start recording the ride, press again to stop recording.
•
Press and hold
and
for 3 seconds to Turn on or Turn off this A-PLUS
Meter.
Try again
Confirm and go back
to SETTING MODE
GPS Cycle Computer (Bluetooth)
Set
Next
All manuals and user guides at all-guides.com
all-guides.com