3
pREdAToR pRo USER MANUAL
ENG
REV_00-0000
Set description
Flashlight, 18650 Li-Ion 3500 mAh battery, magnetic USB charger, clip,
lanyard, holster, silicone grip, 2 spare o-rings, user manual.
The producer reserves the right to change the package at his own
discretion without modifying this manual. Specifications are sub-
ject to change without notice.
Initial Service
TO SET/REPLACE BATTERY
1. Unscrew the tailcap.
2. place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
Tighten the head of the flashlight as far as it can go and adjust the
magnetic charger to the tailcap.
CHARGER COLOR INDICATION
Charger not plugged in:
• Green — device is in waiting mode.
Charger plugged in:
• Green blinking — evaluation of battery voltage.
• Red blinking — clean the external and internal contacts of the tailcap,
as well as the contact areas of the charger.
• orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Clean the tailcap and the threads of the flashlight parts, use a differ-
ent power source.
• Red — charging with rated charging current is going on.
• orange — USB power source voltage is too low, charging current is
reduced.
• Green — charging is finished.
Operation
Before use:
Tighten the tailcap as far as it can go.
IN ANY MODE
Permanent on.
First full click of the button turns the flashlight on.
Second full click turns it off.
Momentary on.
Switched on by half-pressing of the button (no click)
and active till the button is released.
To switch between types of operation
unscrew and tighten up the
head of the flashlight at least 10 times (during rotation the modes will
be changing). The pause between the moves must be less than 1 sec.
The flashlight blinks once, confirming the action.
HUNTING TYPE (BY DEFAULT)
Turbo.
Before switching on the flashlight in Turbo mode, tighten the
head of the flashlight if it is unscrewed.
Additional modes.
Before switching on the flashlight in Additional
mode, unscrew the head to 1/8 if it is tightened. Full click switches on
the last used Additional mode.
Cycling through Additional modes.
To switch the mode turn the
flashlight off and on (by full click or half-pressing). The flashlight must
not be turned off for more than 2 sec. The modes switch cyclically:
Main1 – Main2 – Main3 – Strobe2 (if enabled).
Add/Remove Strobe2 in Additional modes.
Switch on the flashlight
by half-pressing at least 20 times. The flashlight must not be turned on
for more than 1 sec. Last switch must be full click. The flashlight blinks
once, confirming the action.
Remote switch
must be used in Turbo mode.
TACTICAL TYPE
Constant light.
Before switching on the flashlight in Constant light
mode, tighten the head if it is unscrewed.
Changing Constant light modes.
The head is tightened: unscrew it to
1/8 and tighten again in 1 sec. Turbo and Main2 will switch cyclically.